Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that give your home the look of a traditional wood-burning fireplace. These stoves are available in freestanding models as well as fireplace inserts. They can give the appearance of a traditional wood-burning fire.
The auger transports the pellets out of the hopper into the combustion chamber, where they are burnt and generate heat. Sensors are able to monitor the flame and alter the speed of operation to maintain the desired temperature in the room.
1. Energy Efficiency
Pellet stoves use a non-toxic, renewable fuel that is made from compressed sawdust as well as other materials. They are typically put in landfills, but can be used to create a clean, efficient source of heat. This means that they help homeowners lower their energy consumption and reduce greenhouse gas emissions. Many pellet stove users report that they have recouped their initial investment in just a couple of years, by reducing their heating costs.
Pellets are extremely compressed and are more dense than natural wood, making them more efficient to burn. ventless pellet stove produce much less creosote than traditional wood-burning fireplaces. Furthermore, they are stored in plastic bags to seal out moisture and need less frequent cleaning.
Pellet stoves, as with other heating systems, must be sized and vented properly. A qualified technician can assess your space and venting requirements to ensure the best results.
In the process of installation, the hearth is constructed to the right size, and the vent is installed through a pre-cut hole in the siding of your home. The vent can be positioned through a roof or sidewall depending on your preference and local laws.
Once the vent and hearth are finished, the pellet stove can be plugged in and turned on. Certain manufacturers offer a remote control to make it easy to start and keep the fire burning, whereas others provide additional sensors to check airflow and combustion flue temperatures, as well as pressure. When the system detects it needs more pellets or less, it will signal to the auger to accelerate or slow down in line with the needs.
Each stove comes with a hopper for storage that holds from 35 to 130 pounds of pellets until they're needed. Hopper capacities affect how often the stove will need refills, with larger hoppers allowing longer intervals between refills. A grille pulls air from the room, then passes it over the heat exchanger, and then blows heated air through the living space through convection. A grate or auger spreads the pellets, and a pan underneath is used to collect any burned ones, along with the combustion residue.
Although pellet stoves are more efficient than wood-burning models, they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of the stoves require an electrical supply. This could be a problem in a power failure, although backup systems like batteries and generators are available.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they need some maintenance in order to run correctly. Cleaning regularly your stove's exhaust vent and stove will prevent the build-up of harmful creosote which could cause an explosion, fire or damage to your stove or house.
A pellet stove makes use of natural particles that are compressed (such as nutshells, kernels of corn or tiny pieces of scrapwood) made from wood or other materials. The pellets are introduced into the combustion chamber through an auger that is powered by electricity. The speed at which pellets are fed into the burner is controlled by the thermostat you set. This allows the fire to keep roaring or lower or even shut down according to the temperature you set. The ash will be disposed in an empty ash tray beneath the burner. It can be easily removed and then disposed.
Pellets are made from byproducts from lumber processing that would otherwise be discarded. They are renewable resources and release much less dust into the air than traditional wood-burning stoves resulting in a very clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals that are released from pellet stoves is less than the latest EPA certified wood stoves.
These stoves aren't required to be vented via a chimney, as is the case with traditional wood stoves. Instead, they can be vented properly through a wall, or any other exterior structure. Pellet stoves have flue ports that are open on the rear or top of the appliance and are connected to an exhaust pipe that extends outside the home.
One drawback of pellet stoves is that you must purchase or store enough pellets to last through the winter season. Pellet stove owners typically consume three tons of wood pellets per winter, which is a cost of $200 per ton. These expenses will increase over time however it's much cheaper than purchasing and transporting firewood for an old-fashioned wood-burning fireplace or stove. Make sure you buy enough pellets so that your stove can function through the coldest months and that you have a suitable place to store them (preferably cool, dry and away from the ground).
3. Reduce Carbon Footprint
Pellet stoves generate heat from renewable biomass fuel, which reduces the dependence on fossil fuels that are finite. This reduces carbon footprints and increases the diversity of energy sources for homes.
Emissions from pellet stoves are considerably lower than those from wood stoves, and even the latest EPA-certified ones. The emissions from pellet stoves are much lower than ones from gas furnaces. Pellets are made from wood, sawdust and other lumber waste. They may also contain different materials including corn, soybeans, nutshells, cherry pits and agricultural waste. When they are burned, they release less particulates (leading to respiratory problems and allergies) carcinogens, carbon monoxide and nitrogen oxides.
The main difference between the wood stove and the pellet stove is the feed system. Pellet stoves come with hoppers to store the pellets. When the thermostat or sensors signal that the room is in need of heating, the furnace turns. The pellets are then put into the combustion chamber and are burned to produce heat. The air from the combustion chamber is pushed through a heat exchanger that transmits the heat to the blower before releasing it into the room. This process results in low emissions and no creosote buildup.
When the hopper is empty, a cyclone removes the ash and places it in an ash pot. The stove also contains a fan to circulate the fresh, heated air into the living space. The majority of pellet stoves require little maintenance and feature a large viewing space for you and your family to relax and enjoy the flames.
The most significant factor affecting emissions from pellet stoves is the quality of the pellets. Poor-quality pellets produce more emissions. When selecting your pellets ensure that they are certified as meeting certain standards and do not contain other ingredients, such as urea or petroleum-based products. Also make sure you choose a manufacturer that offers a guarantee and will repair or replace parts in case of a problem. Certain states provide homeowners with an incentive to pay taxes when they choose to go even greener. This is a great way to help offset the initial cost of this kind of stove and make installation more affordable.
4. Reduced Noise
Pellet stoves emit very little smoke or exhaust when compared to fireplaces with wood burning. They also utilize an electric fan to distribute heat more evenly throughout the room. This is a major reason why pellet stoves require less maintenance than wood stoves. While wood stoves require regular cleaning of particulates and chemicals to prevent deterioration, pellet stoves can be cleaned by the use of a vacuum cleaner made of metal.
Many manufacturers have designed their stoves to ensure that they are easy to set up and operate as well as maintain. They also make their appliances with a variety of styles to match your home's decor. pellet stoves for sale used include a programmable thermostat, remote control and WIFI apps that let you control and monitor your stove from anywhere in the world.
The majority of pellet stoves have an enormous fuel hopper which can hold between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber by an auger. The speed at which the pellets are delivered to the burner determines how hot the flame is as well as the amount of heat it produces. The hopper could be filled with hardwood pellets, made from wood with a dense structure like hickory and oak or softwood pellets. A lot of stoves can use biomass pellets made of switchgrass and corn. This is a green alternative.
Pellet stoves emit less smoke and require less maintenance due to the fact that they use a cleaner fuel than wood-burning fireplaces. They don't require chimneys, making them the best choice for retrofits or new construction.
As opposed to wood stoves that require regular maintenance to be free of creosote as well as other chemicals, pellet stoves only require periodic inspections to ensure proper operation and maintenance. This could include periodic cleaning and inspection of the ash or "clinker" as well as the motors and fans according to the model. Your appliance dealer will be able to explain the proper procedure for your brand and model. He can also help you identify the right fuel for your stove and provide details on storage and safety.